Lexmark 5200 User Manual

5200 Series All-In-One

Safety information

• Refer service or repairs, other than those described in the user documentation, to a professional

service person.

• Use only the power supply provided with this product or the manufacturer's authorized

replacement power supply.

• Connect the power supply cord to an electrical outlet that is near the product and easily

CAUTION: Do not set up this product or make any electrical or cabling connections, such as the

power supply cord or telephone, during a lightning storm.

accessible.

Unpack your All-In-One.

Note: Contents may vary based on geography.

Connect the power cord.

Your All-In-One may include a

photo cartridge instead of a

black print cartridge.

Make sure the Power light is on.

Before you continue, remove the

photo cartridge from the print

cartridge storage unit.

Reminder: Save the print

cartridge storage unit to protect

unused cartridges.

Note: You may need to purchase a

USB cable separately.

Lift the paper support and extend

the paper exit tray.

Lift the scanner unit.

Load paper and adjust the paper guide.

Press

to scroll to your language

and then press

Open the cartridge lids, insert the cartridges, and

snap the lids closed.

Close the scanner unit.

Remove the sticker and tape from the print cartridges.

21D0070

Steps 11 - 15