Universal Electronics Universal Remote DVR PVR 5 User Manual

Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 1  
ATLAS  
DVR/PVR 5-DEVICE  
Universal Remote Control  
Users Guide  
ownload from Www.Somanuals.com. All Manuals Search And Downloa  
Atlas DVD/PVR Manual 2/14/03 5:00 PM Page 2  
TABLE OF CONTENTS  
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Features And Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Device Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Programming Device Control . . . . . . . . . . . . . . . . . . . . . . 10  
Programming TV/VCR Combo Control. . . . . . . . . . . . . . . 12  
Manufacturer’s Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Setup Codes For Audio Amplifiers. . . . . . . . . . . . . . . . . . . . . . 13  
Setup Codes For Audio Receivers . . . . . . . . . . . . . . . . . . . . . . 13  
Setup Codes For Cable Boxes (Converters) . . . . . . . . . . . . . . . 15  
Setup Codes For DVD Players . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Setup Codes For Satellite Receivers . . . . . . . . . . . . . . . . . . . . 16  
Setup Codes For TVs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Setup Codes For TV/VCR Combos . . . . . . . . . . . . . . . . . . . . . . 20  
Setup Codes For VCRs And PVRs . . . . . . . . . . . . . . . . . . . . . . 21  
Searching For Your Code . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Checking The Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Programming Channel Control Lock . . . . . . . . . . . . . . . . 26  
To De-Activate Channel Control Lock . . . . . . . . . . . . . . . . . . 26  
To Re-Activate Channel Control Lock . . . . . . . . . . . . . . . . . . 26  
Programming ID Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Programming“Tune-In” Keys For Specific Channels . . . 27  
To Program A “Tune-In” Key . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
To Clear A “Tune-In” Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Using The Master Power Key. . . . . . . . . . . . . . . . . . . . . . . 29  
To Program The Master Power Key. . . . . . . . . . . . . . . . . . . . . . 29  
To Operate The Master Power Key . . . . . . . . . . . . . . . . . . . . . . 29  
To Clear The Master Power Key . . . . . . . . . . . . . . . . . . . . . . . . 29  
Re-Assigning Device Keys . . . . . . . . . . . . . . . . . . . . . . . . 30  
Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
To Unlock Volume Control For A Single Device  
(Individual Volume Unlock). . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
To Unlock All Volume Control  
(Global Volume Unlock). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
To Lock Volume Control To One Mode  
(Global Volume Lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Instructions To The User . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Additional Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
2
 
INTRODUCTION  
The Atlas DVR/PVR 5-Device Universal Remote Control  
by Universal Electronics is our latest generation universal  
remote control.Its sophisticated technology allows you to  
consolidate up to five of your original home ent  
FEATURES AND FUNCTIONS  
Use the illustration below to locate features on the  
Atlas DVR/PVR 5-Device Universal Remote Control and  
then study the Key Charts (on the next three pages) to  
learn how they function.  
To find out what type of devices can be controlled by each  
device key after programming,see the Device Table on  
page 8.  
4
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 5  
Key Charts  
Use SETUP for all programming  
sequences.  
Press PWR once to turn on or  
off a home entertainment device.  
For MASTER POWER control, see  
Using The Master Power Key on  
page 29.  
Press AUX,DVD,AUD,TV,or CBL  
once to select a home entertain-  
ment device to control.Also see  
the Device Table on page 8.  
Each device key has an embedded  
LED (red light) that blinks upon  
selection and indicates the remote  
control is working and (after pro-  
gramming) is sending signals.  
Use GUIDE to display the program  
guide.  
Press MENU once to display  
available interactive services.  
Use INFO to display the current  
channel and program information.  
Press SETTINGS once to access  
additional cable features.  
Use the Cursor keys to move the  
cursor in the program guide and  
menu screens and to navigate  
within the interactive service.  
Use SELECT to choose options,  
PPV events,and to tune programs  
from the program guide.  
Use PAGE+ (or PAGE-) to page up  
(or page down) through menu  
screens and the program guide.  
Use EXIT to exit out of your cable  
converters menu and guide.  
Use A,B,or C to access additional  
cable features (see your cable  
converters manual).  
continued on next page...  
5
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 6  
FEATURES AND FUNCTIONS  
Key Charts (continued)  
Use VOL+ (or VOL-) to raise (or  
lower) the audio volume.  
Use FAV to cycle through your  
favorite channels stored in your  
cable converter.  
Use CH+ (or CH-) to select the  
next higher (or lower) channel.  
For DVD players,use these keys to  
skip forward (or reverse) through  
chapters.  
For amplifiers/receivers,use these  
keys to select the next higher (or  
lower) preset station.  
Press MUTE once to turn the  
sound off or on.  
Press LAST once to recall the last  
channel.  
Reserved for use asTune-Inkeys  
(see page 27).  
Use  
to command your PVR  
to instantly replay the last  
7 seconds of a program you are  
watching.  
Press LIST once to display a list  
of recorded shows on your PVR.  
Press LIVE to return to watching  
live TV.  
In all modes except CBL,useREW,  
PLAY,FFWD,STOP,and PAUSE to  
control aVCR,DVD player,or a  
PVR (after selecting a desired  
device).To record in the VCR  
mode,press REC twice.  
In the CBL mode,use above keys  
to control DVR/PVR functions of  
the set-top box.  
6
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 7  
Use the keypadnumbers (1~ 9,  
and 0) to directly tune channels  
(e.g.,09).For amplifiers/receivers,  
use the keypad numbers to select  
inputs 1 through 10.  
In the CBL mode,use ENTER to  
enter information and to access  
music channels.  
In the TV,DVD,or AUX modes for  
certain devices, press ENTER once  
after entering a channel number.  
See your devices owners manual.  
Use PIP ON-OFF to switch the  
Picture-In-Picture feature on or  
off (if available on your TV or  
cable service).  
Use PIP SWAP to switch images  
and sound between the main and  
window pictures.  
Use PIP MOVE to move the window  
picture to different positions in the  
main picture.  
Use PIP CH+ (or CH-) to select  
the next higher (or lower) PIP  
channel.  
In the CBL mode,use VIDEO  
SOURCE to view other video  
sources (A or B) instead of cable.  
In all other modes,use VIDEO  
SOURCE to watch TV or video  
programs on a desired device.For  
amplifiers/receivers,use VIDEO  
SOURCE to select an input source.  
7
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 8  
FEATURES AND FUNCTIONS (continued)  
Device Table  
NOTE: Please refer to the table below when performing the  
instructions in “Programming Device Control” on page 10 or  
“Programming TV/ VCR Combo Control” on page 12.  
After programming,the Atlas DVR/PVR 5-Device  
Universal Remote Control will be able to control the  
following types of devices:  
DEVICE KEY CONTROLS THESE TYPES OF DEVICES  
VCR,TV/VCR Combo,PVR  
(PersonalVideo Recorder),or  
extra DVD Player  
DVD Player  
Audio Amplifier, Tuner, or  
Receiver  
Television  
Cable Box (Converter) or  
Satellite Receiver  
8
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 9  
INSTALLING BATTERIES  
1.  
2.  
On the back of the remote control,push the  
tab and lift off the battery cover.  
Locate the two (2) enclosed AA batteries.  
Match the + and – marks with those in the  
battery case,then insert them.  
3.  
4.  
Align the covers keys with the cases holes  
and press the cover back into place.The tab  
should click when the cover is locked.  
Test the remote control by pressing  
any mode key (e.g.,TV).If the batteries are  
inserted correctly,the LED (red light) will  
blink once  
NOTE: When batteries need replacement, the remote control will  
cease to operate. Replace the batteries and the unit will be restored  
to its full functionality, complete with your favorite settings.  
9
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 10  
PROGRAMMING DEVICE CONTROL  
The Atlas DVR/PVR 5-Device Universal Remote Control  
is preprogrammed to operate the Scientific Atlanta cable  
box (converter) provided by your cable system,an RCA  
TV, a Toshiba DVD player,an RCAVCR (as an AUX  
device),and a Pioneer audio receiver.To control devices  
other than the default brands,perform the following steps;  
otherwise skip this section:  
NOTES: For TV/VCR Combo control, skip this section and perform  
the instructions on page 12. Also refer to the “Device Table” on  
page 8 to find out which devices can be programmed onto each  
device key.  
If you have another brand of cable converter or a satellite receiver  
you would like to control, you’ll first need to unlock the cable ID  
Lock before changing the converter code – see “Programming ID  
Lock” on page 27.  
1.  
Turn on a device and,if applicable,insert  
video media,(e.g.,cassette or disc).  
NOTE: Please read steps 2 through 4 completely  
before proceeding. Highlight or write down the codes  
and device you wish to program before moving on to  
step 2.  
2.  
3.  
On the remote control,press a device key once  
(i.e..,AUX,DVD,AUD,TV,or CBL); it will blink  
once.Then press and hold SETUP until the  
selected mode key blinks twice,then release  
SETUP.  
Use the Manufacturer’s Codes (starting on  
page 13) to locate the the type of device and  
brand name and then enter the first four-digit  
code for your device.If performed correctly,  
the selected mode key will blink twice.  
NOTE: If the selected mode key emits a long blink,  
the entry is invalid. Repeat steps 2 through 3 and try  
entering the same code again.  
4.  
Aim the remote control at the device and  
press PWR once. The device should turn off.  
If it does not, repeat steps 2 through 3, trying  
each code for your brand until you find one  
that works.If it still does not respond, try  
searching for the code (see Searching For Your  
Code on page 24).  
NOTE: If the device does not have a POWER key,  
press the (Play) key.  
10  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 11  
5.  
Repeat steps 1 through 4 for each device you  
want the remote control to operate. For future  
reference,write down each working device  
code in the following boxes:  
AUX Code  
Device Type:_______________________  
DVD Code  
Device Type:_______________________  
AUD Code  
Device Type:_______________________  
CBL Code  
Device Type:_______________________  
TV Code  
11  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 12  
PROGRAMMING TV/VCR COMBO CONTROL  
If you own a TV/VCR Combo,perform the following  
instructions to control this device:  
1.  
Turn on your TV/VCR Combo and insert a  
video cassette.  
2.  
On the remote control,press AUX once; it will  
blink once.Then press and hold SETUP until  
the AUX key blinks twice,then release SETUP.  
3.  
Use the Setup Codes For TV/VCR Combos (on  
page 20) to locate the brand name and then  
enter the first four-digit code for your TV/VCR  
Combo.If you perform this procedure  
correctly,the AUX key will blink twice.  
NOTE: If the AUX key did not blink twice after  
entering the code’s last digit, then repeat steps 2  
through 3 and try entering the same code again.  
If you’ve located a TV/VCR setup code that  
works for your TV/VCR Combo and a separate  
TV code is also listed,you’ll need to program  
this code into the remote control to access  
volume control (see Programming Device  
Control on page 10).  
4.  
5.  
Aim the remote control at your TV/VCR  
Combo and press PWR once.The device  
should turn off.If it does not respond,repeat  
steps 2 through 3,trying each code listed for  
your brand until you find one that works.  
If it still does not respond,try searching for  
the code (see Searching For Your Code on the  
page 24).  
For future reference,write down each working  
device code in the boxes below:  
TV/VCR Code  
TV Code  
(if used)  
12  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 13  
MANUFACTURER’S CODES  
Setup Codes For Audio Amplifiers:  
Aiwa  
0406  
Bose  
0674  
Carver  
0269  
Curtis Mathes  
Denon  
0300  
0160  
Harman/Kardon  
JVC  
0892  
0331  
Left Coast  
Linn  
0892  
0269  
Magnavox  
Marantz  
Optimus  
Panasonic  
Parasound  
Philips  
Pioneer  
Polk Audio  
RCA  
0269  
0269,0892  
0300  
0308,0521,0308  
0246  
0269,0892  
0013,0300  
0269,0892  
0300  
Sony  
0689  
Soundesign  
Technics  
Victor  
0211  
0308,0521  
0331  
Wards  
Yamaha  
0013,0211  
0354  
Setup Codes For Audio Receivers:  
ADC  
0531  
Adcom  
Admiral  
Aiwa  
0616  
0182  
1089,1405,0158,1388,0189,0121,0405  
Akai  
0224,0076  
Alco  
1390  
Apex Digital  
Arcam  
1257  
1120  
Audiotronic  
Audiovox  
Bose  
1189  
1390  
1229  
Capetronic  
Carver  
0531  
1089,1189,0189,0042,0360,0008  
Casio  
0195,0201  
Clarinette  
Compaq  
Curtis Mathes  
Denon  
Emerson  
Fisher  
0195  
1136  
0080,0201  
1104,1160,1311,1360,0004,0273,0771  
0424,0255  
0042,0360,0219  
continued on next page...  
13  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 14  
MANUFACTURER’S CODES  
Setup Codes For Audio Receivers (continued):  
Garrard  
Hafler  
0463,0424,0146,0281  
0146  
Harman/Kardon  
Hewlett Packard  
Inkel  
0110,0189,0891  
1181  
0062  
JBL  
JVC  
KLH  
0110,1306  
0074,1374,0464  
1390  
Kenwood  
1313,1027,1570,1569,0027,0186,0042,0077,0313,0314,  
0569,1051,1052  
Koss  
1366,0424,0255  
LXI  
0181  
Lexicon  
Linn  
1076  
0189  
Lloyds  
Luxman  
MCS  
0195  
0166  
0039,0346,0201  
Magnavox  
Marantz  
Modulaire  
Musicmagic  
NAD  
1089,1189,0531,0189,0195,0391,0128,0222  
1089,1189,0039,0189,0128,0200,0006  
0195  
1089  
0320  
NEC  
0235  
Nakamichi  
Onkyo  
0097,0347  
0135,1298,0100,0380,0119  
Optimus  
1023,0531,0670,0186,0080,0738,0801,0042,0181,0219,  
0177  
Panasonic  
Penney  
Philips  
1518,0039,0309,0367,0518  
0195,0201  
1089,1189,1269,0189,1120,0391  
Pioneer  
Polk Audio  
Proscan  
Quasar  
1023,0531,0014,0150,0630,1343,0080,0244,0289  
0189  
1254  
0039  
RCA  
1023,1254,1390,0531,0080,0360,0054,1154,0346,0530  
Realistic  
Samsung  
Sansui  
0195,0181,0163,0182  
1295  
1089,0189,0346,0193  
Sanyo  
0801,0219  
Scott  
0322,0163  
Sears  
0201  
Semivox  
Sharp  
0255  
0186,0117  
Sherwood  
Sonic  
1653,0491,0502,0062  
0281  
Sony  
1058,1158,1258,1658,1758,0158,0474,0168,1042  
Soundesign  
Stereophonics  
0670  
1023  
14  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 15  
Sunfire  
Sylvania  
Symphonic  
Teac  
1313,0313,0314,1052  
0222  
0182  
0463,0163,0387  
Technics  
Techwood  
Thorens  
Venturer  
Victor  
1308,1309,1518,0039,0309,0208,0518  
0281  
1189  
1390  
0074  
Wards  
Yamaha  
Yorx  
0158,0014,0189,0080,0054  
0176,1176,0186,0081,0082  
0195  
Zenith  
0857,0281  
Setup Codes For Cable Boxes (Converters):  
Director  
0476  
General Instrument 0476  
Jerrold  
Motorola  
Pioneer  
Scientific Atlanta  
0476  
0476  
1877  
1877  
Setup Codes For DVD Players:  
Aiwa  
0641  
Apex Digital  
Audiologic  
B & K  
Blue Parade  
Broksonic  
DVD2000  
Denon  
Emerson  
Enterprise  
Fisher  
0672,0794,0795,0796,0797,0755,0717  
0736  
0655,0662  
0571  
0695  
0521  
0490,0634  
0591  
0591  
0670  
GE  
GPX  
0522,0815,0717  
0769,0699  
0715,0783  
0651  
0717  
0582  
GoVideo  
Gradiente  
Greenhill  
Harman/Kardon  
Hitachi  
0573,0664  
0672  
Hiteker  
JVC  
KLH  
0558,0623  
0717  
Kenwood  
Konka  
Koss  
0490,0534,0682,0737  
0711,0719  
0651  
Lasonic  
0798  
continued on next page...  
15  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 16  
MANUFACTURER’S CODES  
Setup Codes For DVD Players (continued):  
Magnavox  
Marantz  
Microsoft  
Mintek  
0503,0675  
0539  
0522  
0717  
Mitsubishi  
Nesa  
0521  
0717  
Onkyo  
0503,0627  
Oritron  
0651  
Panasonic  
Philips  
0490,0632  
0503,0539,0854  
Pioneer  
0525,0571,0632  
Polk Audio  
Princeton  
Proscan  
RCA  
0539  
0674  
0522  
0522,0571,0822,1022,0717  
Rotel  
0623  
Samsung  
Sansui  
0573,0820  
0695  
Sanyo  
0670  
Sharp  
0630  
Sherwood  
Shinsonic  
Sony  
0633  
0533  
0533  
Sylvania  
Technics  
Techwood  
Theta Digital  
Thrustmaster  
Toshiba  
Tredex  
0675  
0490  
0692  
0571  
0498  
0503,0695,1045  
0799,0800  
0503  
Urban Concepts  
XBox  
0522  
Yamaha  
Zenith  
0490,0539,0545  
0503,0591  
Setup Codes For Satellite Receivers:  
General Instrument 0869  
Motorola  
0869  
0869  
0869  
0869  
Next Level  
RadioShack  
Star Choice  
16  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 17  
Setup Codes For TVs:  
A-Mark  
AOC  
0003  
0030,0019,0185,0003,0052  
Abex  
0032  
Admiral  
Advent  
0093,0463  
0761  
Adventura  
Aiko  
0046  
0092  
Aiwa  
0701  
Akai  
0030  
Alaron  
0179  
Ambassador  
America Action  
Ampro  
0177  
0180  
0751  
Anam  
0180  
Anam National  
Apex Digital  
Archer  
0055  
0767,0765  
0003  
Audiovox  
Baysonic  
Belcor  
0451,0180,0623,0092,0003  
0180  
0019  
Bell & Howell  
Bradford  
Brockwood  
Broksonic  
CXC  
0154,0016  
0180  
0019  
0236,0463,0003  
0180  
Candle  
0030,0056,0046,0186  
Carnivale  
Carver  
0030  
0054  
Celebrity  
Changhong  
Cineral  
0000  
0765  
0451,0092  
Citizen  
0060,0030,0056,0092,0039,0280,0046,0186  
Clairtone  
Concerto  
Contec  
0185  
0056  
0180,0185  
0180  
Craig  
Crosley  
0054  
Crown  
0180,0039  
Curtis Mathes  
0047,0747,1147,1347,0054,0154,0451,0093,0060,0030,  
0056,0145,0016,0166,0702,0466,0039  
Daewoo  
Daytron  
Denon  
0451,0019,0623,0092,0039  
0019  
0145  
Dumont  
Dwin  
Electroband  
Electrohome  
Emerson  
0017,0019  
0720,0774  
0000,0185  
0389  
0154,0236,0463,0180,0178,0179,0019,0623,0177,0185,  
0282,0039,0280,0038  
Envision  
0030  
continued on next page...  
17  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 18  
MANUFACTURER’S CODES  
Setup Codes For TVs (continued):  
Fisher  
Fujitsu  
Funai  
Futuretech  
GE  
0154,0159  
0179,0683  
0180,0179,0171  
0180  
0047,0747,1147,1347,0051,0451,0178,0021,0055,0282,  
0135,0279  
Gibralter  
GoldStar  
Gradiente  
Grunpy  
Hallmark  
Harley Davidson  
Harman/Kardon  
Harvard  
Havermy  
Hitachi  
Infinity  
Inteq  
0017,0030,0019  
0030,0178,0019,0032  
0053,0056  
0180,0179  
0178  
0179  
0054  
0180  
0093  
0056,0145,0016,0151,0032,0038,0279  
0054  
0017  
JBL  
0054  
JCB  
0000  
JVC  
0053  
Janeil  
0046  
KEC  
0180  
KTV  
0180,0030,0185,0039,0280  
Kaypani  
Kenwood  
Kloss  
0052  
0030,0019  
0046  
Konka  
0707,0628,0632,0638,0703  
LG  
0056  
LXI  
0047,0747,0054,0154,0156,0178  
Logik  
0016  
Luxman  
MEI  
0056  
0185  
MGA  
0150,0030,0178,0019  
MTC  
0060,0030,0056,0019,0185  
Magnavox  
Majestic  
Marantz  
Matsushita  
Megatron  
Memorex  
Midland  
Minutz  
Mitsubishi  
Motorola  
Multitech  
NAD  
0054,1254,1454,0030,0179,0187,0096,0020,0186,0386  
0016  
0054,0030  
0250  
0178,0145,0003  
0154,0250,0463,0150,0178,0179,0016  
0047,0747,0017,0051,0135,0039,0032  
0021  
0093,0150,0178,0019  
0093,0055  
0180  
0156,0178,0166  
NEC  
0030,0056,0019,0497  
18  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 19  
NTC  
0092  
Nikko  
Noshi  
0030,0178,0092  
0018  
Onwa  
0180  
Optimus  
Optonica  
Orion  
Panasonic  
Penney  
0154,0250,0166  
0093,0165  
0236,0463,0179  
0051,0250,0055  
0047,0747,1347,0156,0051,0060,0030,0178,0021,0019,  
0018,0135,0039,0003,0032  
Philco  
Philips  
Pilot  
Pioneer  
Portland  
Princeton  
Prism  
0054,0463,0030,0145,0019,0096,0020  
0054,1454  
0030,0019,0039  
0166,0679,0038  
0019,0092,0039  
0717  
0051  
Proscan  
Proton  
Pulsar  
0047,0747  
0178,0466,0003,0052  
0017,0019  
Quasar  
RCA  
0051,0250,0055,0165  
0047,0747,1047,1147,1247,1347,1447,0090,0019,0679,  
0018,0135,0038  
RadioShack  
0047,0747,0154,0180,0030,0178,0056,0019,0165,0039,  
0032  
Realistic  
Rhapsody  
Runco  
SSS  
0154,0180,0030,0178,0056,0019,0165,0039,0032  
0185  
0017,0030,0603,0497  
0180,0019  
Sampo  
Samsung  
Samsux  
Sansei  
Sansui  
Sanyo  
0030,0039,0052,0032  
0060,0030,0178,0766,0056,0019,0702,0032  
0039  
0451  
0463  
0154,0159,0146  
Scimitsu  
Scotch  
Scott  
0019  
0178  
0236,0180,0178,0179,0019  
Sears  
0047,0747,0054,0154,0156,0178,0179,0056,0171,0159,  
0146  
Semivox  
Semp  
0180  
0156  
Sharp  
0093,0688,0689,0165,0039,0386  
Shogun  
0019  
Signature  
Simpson  
Sony  
0016  
0187,0186  
0000,1100  
Soundesign  
Spectricon  
Squareview  
Starlite  
0180,0178,0179,0186  
0003  
0171  
0180  
Supre-Macy  
0046  
continued on next page...  
19  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 20  
MANUFACTURER’S CODES  
Setup Codes For TVs (continued):  
Supreme  
Sylvania  
Symphonic  
TMK  
0000  
0054,0030,0171,0096,0020  
0180,0171  
0178,0056,0177  
0017  
TNCi  
Tandy  
0093  
Tatung  
0055,0003  
0051,0250  
0179  
Technics  
Technol Ace  
Techwood  
Teknika  
0051,0056,0003  
0054,0180,0150,0060,0179,0056,0019,0016,0092,0039,  
0186  
Telefunken  
Toshiba  
0056,0702  
0154,0156,1356,0060,1256  
Tosonic  
0185  
Totevision  
Vector Research  
Victor  
0039  
0030  
0053  
Vidikron  
Vidtech  
Viking  
0054  
0178,0019  
0046  
Wards  
0054,0030,0178,0021,0179,0056,0019,0016,0165,0096,  
0020  
Waycon  
0156  
White Westinghouse 0463,0623  
Yamaha  
Zenith  
Zonda  
0030,0019,0769  
0017,0463,0016,0092  
0003  
Setup Codes For TV/VCR Combos:  
Broksonic  
Citizen  
0002,0479 (for TV use 0463)  
0278  
Colt  
0072  
Curtis Mathes  
Daewoo  
Emerson  
Funai  
0035 (for TV use 0051)  
0278 (for TV use 0624)  
0002,0278 (for TV use 0624),0479 (for TV use 0463)  
0000  
GE  
0035 (for TV use 0051),0048 (for TV use 0093),  
0060 (for TV use 0047),0240  
GoldStar  
0037 (for TV use 0056)  
Harley Davidson  
Hitachi  
0000  
0000  
Lloyds  
0000  
Magnasonic  
Magnavox  
Magnin  
0278  
0000,0081 (for TV use 0054)  
0240  
Memorex  
0037,0162 (for TV use 0250),1162  
20  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 21  
MGA  
0240  
Mitsubishi  
Optimus  
Orion  
0048 (for TV use 0093)  
0162 (for TV use 0250),1162,1262  
0002,0479 (for TV use 0463)  
Panasonic  
Penney  
Quasar  
RCA  
0035 (for TV use 0051),0162 (for TV use 0250),1162  
0035 (for TV use 0051),0037 (for TV use 0056),0240  
0035 (for TV use 0051),0162 (for TV use 0250)  
0035 (for TV use 0051),0048 (for TV use 0093),  
0060 (for TV use 0047),0240  
Sansui  
Sanyo  
0000,0479 (for TV use 0463)  
0240  
Sears  
Sharp  
Sony  
Sylvania  
Symphonic  
Thomas  
0000,0037 (for TV use 0056)  
0048 (for TV use 0093)  
0000,0032 (for TV use 0000)  
0081 (for TV use 0054)  
0000,0563  
0000  
White Westinghouse 0278 (for TV use 0624)  
Zenith 0000  
Setup Codes For VCRs And PVRs:  
Admiral  
Adventura  
Aiko  
0048,0209  
0000  
0278  
Aiwa  
0037,0000,0307  
Akai  
0041,0106,0061  
America Action  
American High  
Asha  
0278  
0035  
0240  
Audiovox  
Beaumark  
Bell & Howell  
Broksonic  
CCE  
0037,0278  
0240  
0104  
0184,1479,0121,0209,0002,0479,0295,0361  
0072,0278  
Calix  
0037  
Canon  
0035  
Capehart  
Carver  
0020  
0081  
Cineral  
0278  
Citizen  
0037,1278,0278  
Colt  
0072  
Craig  
0037,0047,0240,0072,0271  
Curtis Mathes  
Cybernex  
Daewoo  
Daytron  
Denon  
Dynatech  
Electrohome  
Electrophonic  
0035,0060,0760,0162,1035,0041  
0240  
0045,1278,0278,0020,0561  
0020  
0042  
0000  
0037  
0037  
continued on next page...  
21  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 22  
MANUFACTURER’S CODES  
Setup Codes For VCRs And PVRs (continued):  
Emerex  
0032  
Emerson  
0037,0184,0000,1479,1278,0121,0043,0209,0002,0278,  
0479,0561,0061,0208,0036,0295,0361,0294  
Fisher  
0047,0104,0054  
Fuji  
0035,0033  
Funai  
0000  
GE  
0035,0060,0760,1035,1060,0240,0807,0202,0761  
Garrard  
GoVideo  
GoldStar  
Gradiente  
HI-Q  
0000  
0432,0526,0643  
0037,1237,0038  
0000,0008  
0047  
Harley Davidson  
Harman/Kardon  
Harwood  
Headquarter  
Hitachi  
0000  
0081,0038  
0072  
0046  
0000,0042,0041,0105  
Hughes Net.Sys.  
JVC  
0042  
0067,0041,0008  
Jensen  
0041  
KEC  
0037,0278  
KLH  
0072  
Keen  
0693  
Kenwood  
Kodak  
0067,0041,0038  
0035,0037  
LXI  
0037  
Lloyds  
0000,0208  
Logik  
0072  
MEI  
0035  
MGA  
0240,0043,0061  
MGN Technology  
MTC  
0240  
0000,0240  
Magnasonic  
Magnavox  
Magnin  
Marantz  
Marta  
1278  
0035,0039,0081,0563,0000,1781,0149  
0240  
0035,0081  
0037  
Matsushita  
Memorex  
0035,0162,0454  
0035,0037,1037,0048,0039,0047,0162,1162,1262,0000,  
1237,0240,0104,0209,0454,0479,0046,0307  
Minolta  
Mitsubishi  
Motorola  
Multitech  
NEC  
0042,0105  
0067,0807,0043,0061  
0035,0048  
0000,0072  
0067,0104,0041,0038,0040  
Nikko  
Nikon  
Noblex  
0037  
0034  
0240  
22  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 23  
Olympus  
Optimus  
Optonica  
Orion  
0035  
0037,0048,1048,0162,1062,1162,1262,0104,0454,0432  
0062  
0184,1479,0209,0002,0479,0295  
Panasonic  
Penney  
Pentax  
0035,0225,0162,1062,1162,1262,0616,1035,0454  
0035,0037,0042,1237,1035,0240,0038,0054,0040  
0042,0105  
Philco  
0035,0209,0479  
Philips  
0035,0081,1081,1181,0618,0062  
Pilot  
0037  
Pioneer  
Polk Audio  
Portland  
Profitronic  
Proscan  
Protec  
0067  
0081  
0020  
0240  
0060,0760,1060,0202,0761  
0072  
Pulsar  
0039  
Quarter  
Quartz  
Quasar  
RCA  
0046  
0046  
0035,0162,1162,1035,0454  
0060,0760,0042,1035,1060,0240,0807,0149,0106,0202,  
0761,0105  
RadioShack  
Radix  
1037,0000  
0037  
Randex  
Realistic  
ReplayTV  
Ricoh  
0037  
0035,0037,0048,0047,0000,0104,0046,0062  
0614,0616  
0034  
Runco  
0039  
STS  
0042  
Samsung  
Samtron  
Sanky  
0045,0240  
0643  
0048,0039  
Sansui  
Sanyo  
0000,0067,1479,0209,0041,0479,0271  
0047,0240,0104,0046  
Scott  
0184,0045,0121,0043  
Sears  
0035,0037,0047,0000,0042,1237,0104,0046,0105,0054  
Semp  
0045  
Sharp  
0048,0848,0807,0062,0738  
Shintom  
Shogun  
Singer  
0072  
0240  
0072  
Sonic Blue  
Sony  
0614,0616  
0035,0032,1032,0000,0636,0033,1232,0034  
Sylvania  
Symphonic  
TMK  
Tatung  
Teac  
0035,0081,0000,1781,0043  
0000  
0240,0208,0036  
0041  
0000,0041  
Technics  
Teknika  
0035,0162  
0035,0037,0000  
continued on next page...  
23  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 24  
MANUFACTURER’S CODES  
Setup Codes For VCRs And PVRs (continued):  
Thomas  
0000  
Tivo  
Toshiba  
Totevision  
Unitech  
0618,0636  
0045,0845,0043  
0037,0240  
0240  
Vector  
0045  
Vector Research  
Video Concepts  
Videomagic  
Videosonic  
Villain  
0038,0040  
0045,0061,0040  
0037  
0240  
0000  
Wards  
0035,0060,0760,0048,0047,0081,0000,0042,0240,0072,  
0149,0062  
White Westinghouse 1278,0209,0072  
XR-1000  
Yamaha  
Zenith  
0035,0000,0072  
0038  
0039,0000,0033,1479,0209,0479,0034,0637  
SEARCHING FOR YOUR CODE  
If your home entertainment device does not respond to  
the Atlas DVR/PVR 5-Device Universal Remote Control  
after trying all of the codes listed for your brand,or if  
your brand is not listed at all,try searching for your code.  
For example,to search for a code for your TV:  
1.  
2.  
Turn on your TV.  
On the remote control,press TV once; it will  
blink once.Then press and hold SETUP until  
the TV key blinks twice,then release SETUP.  
3.  
4.  
Enter 9 - 9 - 1.TheTV key will blink twice.  
Aim the remote control at the TV and slowly  
alternate between pressing PWR and TV.  
Stop when the TV turns off.  
NOTE: In the search mode, the remote control will  
send IR codes from its library to the selected  
device, starting with the most popular code first.  
24  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 25  
5.  
6.  
Press SETUP once to lock in the code. The TV  
key will blink twice.  
To search for the codes of your other devices,  
repeat steps 1 through 5,but substitute the  
appropriate key (e.g.,AUX, DVD, AUD, or CBL)  
for the device you are searching for.  
CHECKING THE CODES  
If you have set up the Atlas DVR/PVR 5-Device Universal  
Remote Control using the Searching For Your Code  
procedure (on the previous page),you may need to find  
out which four-digit code is operating your equipment.  
For example,to find out which code is operating your TV:  
1.  
On the remote control,press TV once; it will  
blink once.Then press and hold SETUP until  
the TV key blinks twice,then release SETUP.  
2.  
3.  
Enter 9 - 9 - 0.TheTV key will blink twice.  
To view the code for the first digit,press 1  
once.Wait 3 seconds and count the number  
of times the TV key blinks (e.g.,3 blinks = 3)  
and write down the number in the leftmost  
TV Code box on page 11.  
NOTE: If a code digit is “0”, the selected mode key  
will not blink.  
4.  
5.  
Repeat step 3 three more times for the  
remaining digits.Use 2 for the second digit,  
3 for the third digit,and 4 for the fourth digit.  
Finish writing down the code in the TV Code  
boxes on page 11.  
To check for other device codes,repeat steps  
1 through 4,but substitute the appropriate key  
(e.g.,AUX, DVD, AUD, or CBL) for the device  
you are checking.Write down the codes in the  
appropriate boxes on page 11.  
25  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 26  
PROGRAMMING CHANNEL CONTROL LOCK  
By default,the remote controls channel-control capabilities  
are locked to the cable converter. The affected keys* are  
0~ 9,CH+,CH-,ENTER,andLAST.This will guarantee that  
you do not inadvertently change a channel on your TV or  
VCR.However,you can de-activate this feature to allow full  
access to these keys in the TV andVCR modes.  
*NOTE: This feature does not affect the AUD mode.  
To De-Activate Channel Control Lock:  
1.  
2.  
On the remote control,press CBL once; it will  
blink once.Then press and hold SETUP until  
the CBL key blinks twice,then release SETUP.  
Enter 9 -7- 3.TheCBL key will blink twice.  
3.  
4.  
Press CH- once. The CBL key will blink  
four times.  
Now,the remote control will provide TV and  
VCR channel-control capabilities while in the  
TV orVCR mode.  
To Re-Activate Channel Control Lock:  
1.  
On the remote control,press CBL once; it will  
blink once.Then press and hold SETUP until  
the CBL key blinks twice,then release SETUP.  
2.  
Enter 9 -7- 3.TheCBL key will blink twice.  
3.  
4.  
Press CH+ once.The CBL key will blink twice.  
Now, regardless of what mode you select  
(except AUD),only the channel control  
capability of your cable converter will be  
accessible.  
26  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 27  
PROGRAMMING ID LOCK  
The Atlas DVR/PVR 5-Device Universal Remote Control  
is locked at the factory to operate a Scientific Atlanta  
cable converter.However,if you have another brand or  
model of cable converter or satellite service that you  
would like to control,then you’ll need to perform the fol-  
lowing steps to unlock the ID Lock,enter in a new manu-  
facturers code,and lock the ID Lock again.  
1.  
2.  
Turn on the cable converter.  
On the remote control,press CBL once; it will  
blink once.Then press and hold SETUP until  
the CBL key blinks twice,then release SETUP.  
3.  
4.  
Enter 9 - 8 - 2.TheCBL key will blink  
four times,indicating ID Lock is unlocked.  
Perform the instructions in Programming  
Device Control on page 10 to program device  
control for the desired cable converter or  
satellite receiver.Upon completion,perform  
the remaining steps (5 and 6 on this page) to  
again lock the ID Lock.  
5.  
6.  
On the remote control,press CBL once; it will  
blink once.Then press and hold SETUP until  
the CBL key blinks twice,then release SETUP.  
Enter 9 - 8 - 2.TheCBL key will blink twice,  
indicating ID Lock is again locked.  
PROGRAMMING TUNE-IN” KEYS  
FOR SPECIFIC CHANNELS  
The Atlas DVR/PVR 5-Device Universal Remote Control  
includes threeTune-Inkeys (located directly below the  
MUTE and LAST keys).Each can be programmed to  
remember three of your favorite cable channel settings  
for a total of nine channels.If you want to change the  
cable channels in a previously-programmedTune-In”  
key,you’ll need to clear the key first (see next page).  
continued on next page...  
27  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 28  
PROGRAMMING TUNE-IN” KEYS  
FOR SPECIFIC CHANNELS (continued)  
To Program A Tune-In” Key:  
1.  
2.  
3.  
On the remote control,press CBL once; it will  
blink once.Then press and hold SETUP until  
the CBL key blinks twice,then release SETUP.  
Enter 9 - 9 - 5.TheCBL key will blink  
twice.Then select aTune-Inkeyand press  
it once.  
Press CBL once followed by the channel  
number to be programmed (e.g., 3 - 9).  
NOTE: If you are programming a channel for a  
Digital Cable Converter, you need to enter all  
channels in a 3-digit channel format. For example,  
if the desired channel is 39, then enter it as 0 - 3 - 9.  
4.  
5.  
Press and hold SETUP until the CBL key blinks  
twice,then release SETUP.  
To add another channel,repeat steps 1  
through 4,substituting the new channel to be  
added in step 3.  
NOTE: Programming more than three channels on the  
same “Tune-Inkey will overwrite previous settings.  
To Clear A Tune-In” Key:  
1.  
On the remote control,press CBL once; it will  
blink once.Then press and hold SETUP until  
the CBL key blinks twice,then release SETUP.  
2.  
Enter 9 - 9 - 5.TheCBL key will blink  
twice.Then select aTune-Inkeyyou want to  
clear and press it once.  
3.  
4.  
Press and hold SETUP until the CBL key blinks  
twice,then release SETUP.  
ThisTune-Inkey is now clear and ready for  
reprogramming (see above – To P rog ram A  
Tune-In” Key). If desired, repeat steps 1  
though 3 in this section to clear another  
Tune-Inkey.  
28  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 29  
USING THE MASTER POWER KEY  
The Atlas DVR/PVR 5-Device Universal Remote Control  
has a unique feature that allows you to sequentially turn  
on or off up to five of your home entertainment devices  
with a single key press.  
To Program The Master Power Key:  
1.  
On the remote control,press and hold SETUP  
until the last-selected device key blinks twice,  
then release SETUP.  
2.  
Enter 9 - 9 - 5.The last-selected device key  
will blink twice.Then press PWR once.  
3.  
4.  
5.  
For the first device you want in the power on  
sequence,press a device key (e.g.,CBL) once .  
Repeat step 3 up to four more times to add the  
second,third,fourth,and fifth device,as desired.  
To save the settings and exit the program,press  
and hold SETUP until the last-selected device  
key blinks twice,then release SETUP.  
To Operate The Master Power Key:  
NOTE: If MASTER POWER is not programmed, pressing it will only  
command the last-selected device to power on or off.  
1.  
2.  
After programming,point the remote control  
at the devices.  
Press and hold PWR for at least 2 seconds.  
You will see the devices power on or off  
according to the programmed sequence.  
To Clear The Master Power Key:  
1.  
Perform steps 1 and 2 in the first section  
above, To Program The Master Power Key.  
2.  
To clear the settings and exit the program,  
press and hold SETUP until the last-selected  
device key blinks twice,then release SETUP.  
29  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 30  
RE-ASSIGNING DEVICE KEYS  
The Atlas DVR/PVR 5-Device Universal Remote Control  
can be set up to control a second device. For example,  
to have the unit control a TV, a Cable Converter, and two  
DVD Players, you will need to re-assign the unused AUX  
key to operate the second DVD Player as follows:  
NOTE: AUX is preset at the factory to control an RCA VCR.  
Performing the below steps will overwrite those settings.  
1.  
On the remote control,press AUX once; it will  
blink once.Then press and hold SETUP until  
the AUX key blinks twice,then release SETUP.  
2.  
3.  
4.  
Enter 9 - 9 - 2.TheAUX key will blink twice.  
Press DVD once, then press AUX once. The  
AUX key will blink twice.  
The AUX key is now ready to be programmed  
for your second DVD player.See Programming  
Device Control on page 10.  
To re-assign other device keys,repeat steps 1 to 4 and  
substitute the key sequence using the following chart:  
NOTE: Only one device can be assigned to an unused device key  
at a time.  
To Re-Assign  
Perform Key Sequence  
AUX as 2nd AUD key: AUX- SETUP - 9 - 9 - 2 - AUD - AUX  
AUX as 2nd TV key: AUX- SETUP - 9 - 9 - 2 - TV - AUX  
AUX as 2nd CBL key: AUX- SETUP - 9 - 9 - 2 - CBL - AUX  
AUX back to AUX:  
AUX- SETUP - 9 - 9 - 2 - AUX - AUX  
To re-assign another unused device key,substitute it for  
the AUX key above and then perform the sequence.For  
example,to re-assign an unused AUD key as a second DVD  
key, perform AUD - SETUP - 9 - 9 - 2 - DVD - AUD.  
When a re-assignment is done,the selected device key  
(e.g.,AUD) will blink twice to confirm your choice.At that  
time,you will need to program device control (see  
Programming Device Control on page 10).  
30  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 31  
CHANGING VOLUME LOCK  
On this remote control,Global Volume Lock is set to TV,so  
you can control TV volume while in the AUX,DVD,TV or  
CBL mode.If desired,you can still perform Individual  
Volume Unlo ck on a selected device to set its volume con-  
trol for independent operation.  
NOTE: The audio mode’s volume controls are active regardless of  
Volume Lock settings. However, if you lock the volume controls to  
the AUD mode, you will have control of the audio device’s volume  
in all other modes (i.e., AUX, DVD, TV, and CBL).  
To Unlock Volume Control For A Single Device  
(Individual Volume Unlock):  
1.  
Assuming Global Volume Lock is active,select  
a mode on the remote control that you want to  
unlock (e.g.,CBL) and press it once.Next,  
press and hold SETUP until the device key  
blinks twice,then release SETUP.  
2.  
3.  
Enter 9 - 9 - 3.The last-selected device key  
will blink twice.  
Press VOL- once.The last-selected device key  
will blink four times.  
4.  
5.  
Repeat steps 1 through 3 (of this section) for  
each device you want volume to be unlocked.  
Now,after you select a device that has volume  
unlocked (e.g., CBL),pressing VOL+, VOL-,or  
MUTE,will control the devices volume only in  
its own mode.  
To Unlock All Volume Control  
(Global Volume Unlock):  
NOTE: Performing these instructions will set independent volume  
control for all programmed devices.  
1.  
2.  
On the remote control,press and hold SETUP  
until the last-selected device key blinks twice,  
then release SETUP.  
Enter 9 - 9 - 3.The last-selected device key  
will blink twice.  
3.  
Press VOL+ once.The last-selected device key  
will blink four times.  
continued on next page...  
31  
 
CHANGING VOLUME LOCK (continued)  
To Lock Volume Control To One Mode  
(Global Volume Lock):  
NOTE: The audio mode’s volume controls are active regardless of  
Volume Lock settings. However, if you lock the volume controls to  
the AUD mode, you will have control of the audio device’s volume  
in all other modes (i.e., AUX, DVD, TV, and CBL).  
1.  
On the remote control,press and hold SETUP  
until the last-selected device key blinks twice,  
then release SETUP.  
2.  
Enter 9 - 9 - 3.The last-selected device key  
will blink twice.  
3.  
4.  
Select a mode (e.g.,TV) where you want to  
globally lock the volume controls.The selected  
device key will blink twice.  
Now,when you press VOL+, VOL-,or MUTE,  
the volume of the selected device (e.g.,TV)  
can be controlled regardless of mode.  
32  
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 33  
TROUBLESHOOTING  
PROBLEM: Device key does not blink when you press a key.  
SOLUTION: Replace the batteries with two (2) new AA  
alkaline batteries (see page 9).  
PROBLEM: Device key blinks when you press a key,but home  
entertainment device does not respond.  
SOLUTION: Make sure you are aiming the remote control at  
your home entertainment device and that you  
are within 15 feet of the device you are trying  
to control.  
PROBLEM: The remote control does not control home  
entertainment devices or commands are not  
performing properly.  
SOLUTION: Try all listed codes for the device brand being set  
up.Make sure all devices can be operated with  
an infrared remote control.  
PROBLEM: TV/VCR Combo does not respond properly.  
SOLUTION: Use theVCR codes for your brand.Some combo  
units may require both a TV code and aVCR  
code for full operation (see page 12).  
PROBLEM: No volume on a second TV.  
SOLUTION: Follow instructions in Changing Volume Lock  
(see page 31).  
PROBLEM: CH+, CH-, and LAST do not work for your  
RCA TV.  
SOLUTION: Due to RCA design (1983-1987),only the original  
remote control will operate these functions.  
PROBLEM: TriedSearch Methodand still could not find a  
working code.  
SOLUTION: Try the“Search Methodagain after clearing out  
the device key as follows: Press and hold SETUP  
until device key blinks twice,then release.Next  
enter 9 - 9 - 2.Then press and release the device  
key to be cleared twice.  
PROBLEM: Remote control does not turn on Sony or Sharp  
TV/VCR Combo.  
SOLUTION: For power on,these products require program-  
ming TV codes on the remote control.For Sony,  
use TV code 0000 andVCR code 0032.For Sharp,  
use TV code 0093 andVCR code 0048.  
33  
 
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 34  
INSTRUCTIONS TO THE USER  
This equipment has been tested and found to comply  
with the limits for a class B digital device,pursuant to part  
15 of the FCC Rules.These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation.This equipment generates,uses  
and can radiate radio frequency energy and if not  
installed and used in accordance with the instructions,  
may cause harmful interference to radio communications.  
However,there is no guarantee that interference will not  
occur in a particular installation.If this equipment does  
cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off  
and on,the user is encouraged to try to correct the inter-  
ference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment  
and receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
This equipment has been verified to comply with the  
limits for a class B computing device,pursuant to FCC  
Rules.In order to maintain compliance with FCC  
regulations,shielded cables must be used with this  
equipment.Operation with non-approved equipment or  
unshielded cables is likely to result in interference to  
radio and TV reception.The user is cautioned that  
changes and modifications made to the equipment  
without the approval of manufacturer could void the  
user's authority to operate this equipment.  
34  
 
ADDITIONAL INFORMATION  
This product does not have any user-serviceable parts.  
Opening the case,except for the battery cover,may cause  
permanent damage to  
35  
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 36  
 

TC electronic SDN BHD Stereo Receiver 24D User Manual
Tektronix Camcorder 1780 R User Manual
Tektronix Car Amplifier 070 1616 00 User Manual
Topcom Telephone FIDELITY 1081 User Manual
Tripp Lite Power Supply SUPDM11 User Manual
Tripp Lite Surge Protector ISOTEL8ULTRA User Manual
Tripp Lite TV Cables P940 08I User Manual
Uniden Cordless Telephone XSA650 User Manual
Vulcan Hart Food Warmer FRYMATE VX21 User Manual
Warwick Stereo Amplifier Quad IV User Manual