D01244120B
DR-70D
Linear PCM Recorder for DSLR
Reference Manual
Contents
7 – Connecting with a Computer .................32
Transferring files to a computer ..................................32
Transferring files from a computer.............................32
Disconnecting from a computer.................................32
8 – Settings and Information .......................33
Viewing information........................................................33
File information page (PROJECT)..........................33
Card information page (CARD)..............................33
System information page........................................33
System Settings .................................................................34
Setting the automatic power saving function ..34
Setting the backlight ................................................34
Adjusting the display contrast...............................34
Restoring the factory settings...............................34
Formatting an SD card .............................................34
Setting the battery type.................................................34
Setting the file name format ........................................35
File name format ........................................................35
Setting the WORD item............................................35
Initializing the count.................................................35
9 – Using the REMOTE jack...........................36
Using a footswitch (TASCAM RC-3F)...........................36
Making footswitch settings....................................36
Footswitch uses ..........................................................36
Using a remote control (TASCAM RC-10) ..................36
Making remote control settings ...........................36
Remote control uses .................................................36
10 – Messages ...............................................37
11 – Troubleshooting....................................38
12 – Specifications ........................................39
Ratings ..................................................................................39
Input/output ratings........................................................39
Analog audio input and output ratings.............39
Control input/output ratings.................................39
Audio performance..........................................................39
Requirements for connected computers.................40
General .................................................................................40
Dimensional drawings ....................................................41
TASCAM DR-70D
3
1 – Introduction
Features
This product has a Blackfin® 16/32-bit embedded processor
made by Analog Devices, Inc. This processor controls the
unit's digital signal processing.
Inclusion of this Blackfin® processor in the product increases
its performance and reduces its power consumption.
This recorder includes audio inputs and outputs that are suitable
for use with digital single-lens reflex (DSLR) cameras, enabling
the recording of high-quality audio with DSLR video.
•
Compact audio recorder that uses SD/SDHC/SDXC cards as
recording media
•
TASCAM original High Definition Discrete Architecture
(HDDA) microphone preamps provide high-quality
recording inputs
Conventions used in this manual
•
In addition to ordinary stereo recording, simultaneous
recording of up to four channels is possible
Four channels can be mixed down to two for stereo output
Recording levels can be adjusted independently for the 1/L,
2/R 3/L and 4/R channels
Dual recording function allows two files to be recorded
simultaneously at different levels
44.1/48/96 kHz, 16/24-bit, linear PCM (WAV format)
recording possible
Broadcast Wave Format (BWF) supported as WAV recording
format
XLR mic/line inputs can provide phantom power (24V/48V)
and TRS mic/line inputs (exclusive use) support +24dBU
input when set to LINE
The following conventions are used in this manual.
•
When we refer to buttons, connectors and other parts of
this unit, we use a bold font like this: MENU button.
•
•
•
When we show messages, for example, that appears on the
unit’s display, the typeface looks like this: INPUT.
•
•
•
•
•
•
SD, SDHC and SDXC memory cards are called “SD cards”.
Information shown on the computer display is written like
this “OK”.
•
As necessary, additional information is provided under TIP,
NOTE and CAUTION headings.
TIP
These are tips about how to use the unit.
NOTE
•
Stereo mini jack input supports mics that require plug-in
power, allowing the input of video mics and other
high-output mics (+10dBV maximum input level)
These provide additional explanations and describe special
cases.
•
•
•
Slate tone functions (automatic/manual) simplify
synchronization of video files when editing
CAMERA OUT connector allows the high-quality audio from
this unit to be output to a DSLR camera for recording
CAMERA IN connector enables convenient monitoring of
audio from a DSLR camera
Mid-side decoding function can be used with MS mics
Track incrementing function allows a recording to be split
by creating a new file when desired
Limiter function automatically reduces parts where the
input level is too high to suitable levels
CAUTION
Failure to follow these instructions could result in injury,
damage to equipment or lost recording data, for example.
Information and various data about products provided
in this manual are provided merely as examples. They do
not provide a guaranty against violations of third-party
intellectual property rights or other rights related to
them. Therefore, please be aware that our company will
bear no liability for violations of third-party intellectual
property rights or responsibility for liability that results
from the use of these products.
•
•
•
•
•
Low cut filter conveniently reduces low-frequency noise
Delay function that eliminates time lags caused by
differences in the distances of two sets of inputs from the
sound source
Tone search function enables moving between tone
insertion points
File name format can be set to use a user-defined word or
the date
Resume function to memorize the playback position before
the unit is turned off (enter standby)
Third-party copyrighted materials cannot be used
without permission of the rights holder in accor-
dance with copyright law for uses other than personal
enjoyment, for example. Please use the equipment
appropriately.
Our company will bear absolutely no liability related to
user activity that infringes on property rights.
•
•
•
•
•
•
•
3.5mm (1/8”) line/headphones output jack
128x64 dot-matrix LCD with backlight
Micro-B USB 2.0 port
Operates on 4 AA batteries, an AC adapter (TASCAM
PS-P515U sold separately), external battery pack (TASCAM
BP-6AA sold separately) or USB bus power
•
•
Tripod mounting thread (bottom) and DSLR screw
attachment that allows attachment and removal with a coin
(top)
Dedicated remote control jack (for use with RC-10 and
RC-3F (sold separately)
•
•
Hold function to prevent accidental operation
Guards on the front left and right sides protect the screen
TASCAM DR-70D
4
1 – Introduction
About SD cards
This unit uses SD cards for recording and playback.
You can use 64MB–2GB SD cards, 4GB–32GB SDHC cards and
48GB–128GB SDXC cards with this unit.
A list of SD cards that have been confirmed for use with this unit
can be found on the TEAC Global Site (http://teac-global.com/).
Please check this site or contact TASCAM customer support.
Precautions for use
SD cards are delicate media. In order to avoid damaging a card
or the card slot, please take the following precautions when
handling them.
•
•
•
•
•
•
Do not leave them in extremely hot or cold places.
Do not leave them in extremely humid places.
Do not let them get wet.
Do not put things on top of them or twist them.
Do not hit them.
Do not remove or insert a card during recording, playback,
data transmission or other access.
•
When carrying a card, please put it inside a card case, for
example.
TASCAM DR-70D
5
|