USER‘S
GUIDE
RP-9540
RP-9555
AUDIO SYSTEM
Where to Start
Owning an RCA compact audio system is like having a
component stereo system, except you don’t have the hassle of
hooking up a bunch of wires.
Looking for a Good Read?
You won’t find this instruction book on the best seller list, but
it does contain a lot of information that you should know
before using your RCA stereo system.
I know that you want to use your stereo, not read about it, but
you really need to read the first section, “First Things First,” to
learn how to hook it up; then, as you have time, you can read
about all of the great features of this stereo.
Don’t Forget the Notes
Don’t forget to read the notes in the margins too. They give
you extra information that can help you get the most from
your stereo.
If you have any questions, be sure to check
the Troubleshooting Tips section, the Index, or the Table of
Contents to help you find the answer.
Table of Contents
First Things First ...................................................2
Before You Begin....................................................2
Installation and Set Up ..................................... 3
General Controls................................................. 4
Using the Tuner ..................................................... 7
Using the CD Player ..............................................9
Using the Cassette Deck .................................... 14
Using the Remote Control .............................. 16
Care and Maintenance .................................... 17
Troubleshooting Tips .......................................18
Index ......................................................................... 19
Limited warranty.............................................. 20
1
1
2
First Things First
DECK
DECK
PHONES
POWER
CD
TAPE
TUNER
VIDEO
1
VIDEO
2
3
BAND GRAPHIC EQUALIZER
Make sure your package contains all of the items shown to
the right.
STANDBY
100 kHz
1kHz
10kHz
REMOTE SENSOR
SRS
(
)
CUSTOM
INTRO REPEAT PROGRAM SHUFFL
VOLUME AUTO TRACK SKIP
100 Hz
kHz
10 kHz
1
ALL DISC
BASS BOOST
S
ROCK
POP
C
L
A
S
S
I
C
A
L
C
U
S
T
O
M
STEREO
DISC
REMAIN TIME
VOLUME
FM
1
AM
kHz
MHz
TUNING
UP
DOWN
PRESET/TUNE
BASSBOOST
STEREO
/MONO
SEEK
Before You Begin
SELECT
DISC
PROGRAM
/SCAN
DISC
3
ROCK
POP
CLASSICAL
DISC
5
DISC
1
OPEN/CLOSE
REPEAT
INTRO
SHUFFLE
CLEAR
PROGRAM
ATS
There are a couple of things you need to know in order to
get the best possible performance from your system.
Moisture Condensation
Unit
Just as moisture can form on the inside of windows on a cold
day, it can also form on the inside of your stereo, causing it
to malfunction. Some situations in which condensation might
form include the following:
•
•
•
Immediately after a heater has been turned on
In a steamy or very humid room
When the system is suddenly moved from a cold
environment to a warm, moist one; for example, in
moving the stereo from a cool air conditioned room to
an outside porch on a humid, summer day.
Speakers
If moisture forms inside this player, it may not operate
properly. To correct the problem, turn off the power and
wait about 30 minutes for moisture to evaporate.
Location
Surround Speakers
These guidelines should be followed when deciding on a
place to put your stereo system:
POWER
TUNER
VIDEO
TAPE
•
•
•
•
Choose a level, solid, surface. Don’t place it on a soft
surface, such as carpeting or foam rubber.
CD
P
RE
S
E
T
Q
E
V
O
L
L
V
Choose a location away from direct sunlight, radiators,
air ducts, and other sources of heat.
M
UT
E
TRACK
PLAY
TRACK
SEARCH
SEARCH
STOP
Avoid locations that are subject to moisture, mechanical
vibration, shock, or excessive dust.
SHUFFLE
SEEK
REPEAT
PRESET
DISC SKIP
AM loop antenna
FM antenna wire
TUNING
Make sure that the location has adequate air circulation.
Good ventilation is essential to protect the system from
internal heat build up.
Remote control
CRK290A
Speaker Placement
For optimal listening, place speakers at least seven feet apart
and facing the listener.
Be a Pack Rat
It’s a good idea to keep the box and
all of the packing materials when
you’re done unpacking the system in
case you need to store, move, or ship
the unit at a later date.
2
WARNING:
Installation and Set Up
Be sure to follow these instructions
carefully; the system can be damaged
if speakers are improperly connected.
Now that you’ve chosen a stereo location, it‘s time to hook
it up.
Speakers
SUB WOOFER
Each speaker has its own connection terminals on the back
of the system, so connect the wires from each speaker to
one set of terminals. When connecting the speakers, make
sure that the bare end of each wire makes contact with the
metal grips inside the terminal. There are connections
provided for main and surround speakers The sub-woofer is
an RCA type connecton.
MAIN SPEAKERS
R
L
+
RED
RED
BLACK
BLACK
–
+
RED
RED
For Each Speaker:
BLACK
BLACK
1. Press down on the tab to open the red terminal and
insert the red wire (+) into the red terminal.
–
SURROUND SPEAKERS
Speaker Hookup
2. Press down on the tab to open the black terminal and
insert the black wire (–) into the black terminal.
Antennas
The AM and FM wire antennas connect to the FM ANTENNA
terminals and AM terminal on the system’s back panel, and
must be connected for clear reception. Connect the antenna
wires the same way you connect the speakers.
After connecting the antennas, extend them to their full
length; then you can adjust their position for better
reception when you are listening to the radio.
Antenna Hookup
Auxiliary Components
R
L
Use the VIDEO input jacks on the back of the system to add
a component that provides an additional source of sound
into your system (VIDEO 1 or VIDEO 2)— additional VCRs,
camcorders, or other compatible devices.
R
L
R
L
To hook up an auxiliary component, match the left and
right output plugs from the component to the left (L) and
right (R) VIDEO 1 or VIDEO 2 input jacks on the back panel.
VIDEO Component Hookup
AC Power
Plug the power cord into an AC power outlet that accepts
the polarized plug (one blade wider than the other).
Notice that the Standby Indicator Light comes on to let you
know that the system is plugged in and ready to use. This
light stays on as long as the stereo is plugged in, so that
you can use the remote control to turn on and operate the
system.
Have a Blast—Just Not on Your
Eardrums
Make sure that you turn down the stereo
before you put on the headphones; then
increase the volume to the desired level
after they are in place.
Headphones
To listen to your stereo with headphones (not included), use
1
the /4“ PHONES jack on the front of the system.
3
General Controls
Now you’re ready to use your system, and this section introduces you to the controls and features that are
common to the tape decks, the tuner, and the CD player.
The Panel Display
When the power is on, the Panel Display lights up, telling you what’s going on with your system.
Mode indicators
Visual Equalizer presets
ROCK
BASS BOOST
POP
CLASSICAL CUSTOM
STEREO
Custom Equalizer Indicator
Bass Boost indicator
S
INTRO
DISC
REPEAT PROGRAM
1 ALL DISC
SHUFFLE
VOLUME AUTO TRACK SKIP
REMAIN TIME
100 Hz
FM
Number
indicator
for Current
Disc
1 kHz
10 kHz
AM
dB
kHz
MHz
Radio band
indicator
3 band graphic
equalizer
indicators
Digital display for Tuner
• Tuner Frequency
• CD Time Indicator
Number indicator for:
• Volume level
• Preset radio stations
• CD Track number
• SEEK/SCAN
Don’t Worry
So you think the Panel Display looks intimidating.
Don’t worry, you won’t see all of this stuff at the
same time—you’ll only see what you need to see.
The following list of display information is presented in alphabetical order and corresponds to the items
in the preceding graphic.
Bass Boost Indicator. Shows the current setting for Bass Boost.
CD Time Indicator. Indicates whether the playing time displayed is the elapsed time or the time
remaining on a disc. The playing time itself is displayed beneath the indicator.
Digital Display. Shows the current frequency in tuner mode and the track time in CD mode.
Custom Equalizer Indicator. Indicates custom equalizer mode.
Mode Indicators. Show which mode(s) the system is in.
Number Indicator. Depending on the current mode, shows the volume level, the preset number for radio
stations, or the track number of a CD.
Number Indicator. Shows disc number.
Radio Band Indicator. Shows which radio band you are using. When listening
to FM stereo, the STEREO indicator also is displayed (if the station is broadcasting in stereo).
Tuner Frequency. Shows the AM or FM radio frequency.
Visual Equalizer Presets. Shows which preset option (Rock, Pop, or Classical) you have chosen.
3 Band Graphic Equalizer Indicators. Shows which band (100Hz, 1 kHz, or 10kHz) you have chosen.
4
POWER ON
Standby Indicator Light
Power button
Plug in the system and the standby indicator light comes on.
The system can be operated either by using the remote
control or by pressing the POWER button. Note that the
power button is DIGITAL.
POWER
CD
TAPE
TUNER
VIDEO
1
VIDEO
2
3
BAND GRAPHIC EQUALIZER
STANDBY
100 kHz
1kHz
10kHz
REMOTE SENSOR
SRS
(
)
CUSTOM
INTRO REPEAT PROGRAM
SHUFFL
VOLUME AUTO TRACK SKIP
100 Hz
kHz
10 kHz
1
ALL DISC
S
ROCK
POP
CLASSICAL CUSTOM
BASS BOOST REMAIN TIME
STEREO
DISC
VOLUME
FM
1
AM
kHz
MHz
TUNING
UP
DOWN
POWER OFF
PRESET/TUNE
BASSBOOST
STEREO
/MONO
SEEK
/SCAN
SELECT
DISC
PROGRAM
DISC
3
ROCK
POP
CLASSICAL
Press the POWER button on the system or the remote control
to turn off the power and the standby indicator light
comes on.
OPEN/CLOSE
REPEAT
INTRO
SHUFFLE
CLEAR
PROGRAM
ATS
Infrared Remote Control Sensor
Function buttons
Remote Sensor
Next to the panel display is the Infrared Remote Control
sensor. Make sure that this is not covered up or blocked, or
the remote control won’t work.
Function Buttons
POWER
CD
TAPE
TUNER
VIDEO
1
VIDEO
2
3
BAND GRAPHIC EQUALIZER
Use the function buttons (CD, TAPE, TUNER/BAND, VIDEO 1,
or VIDEO 2) to choose which component function you want
to use.
STANDBY
100 kHz
1kHz
10kHz
REMOTE SENSOR
SRS
(
)
CUSTOM
INTRO REPEAT PROGRAM
DISC
1
ALL DISC
S
ROCK
POP
CLASSICAL CUSTOM
SHUFFL
VOLUME AUTO TRACK SKIP
BASS BOOST REMAIN TIME
STEREO
VOLUME
100 Hz
kHz
10 kHz
FM
1
AM
kHz
MHz
TUNING
UP
DOWN
PRESET/TUNE
BASSBOOST
STEREO
/MONO
SEEK
/SCAN
SELECT
DISC
PROGRAM
DISC
3
ROCK
POP
CLASSICAL
Volume
OPEN/CLOSE
REPEAT
INTRO
SHUFFLE
CLEAR
PROGRAM
ATS
Turn the volume dial to increase or decrease the volume. The
volume level is displayed numerically in the display
(from 0 mute to 32).
Volume
Digital Equalizer
Custom preset button
Preset
Pressing the ROCK, POP, or CLASSICAL buttons control the
visual electronic equalizer. Press this button to choose one of
the preset electronic equalizer frequencies. (ROCK, POP, or
CLASSICAL) appears in the display.
3
BAND GRAPHIC EQUALIZER
100 kHz
1kHz
10kHz
Custom
SRS
(
)
CUSTOM
VOLUME
Pressing the CUSTOM button lets you create custom settings.
Press one of the 3 BAND GRAPHIC EQUALIZER buttons and
turn the volume dial to increase or decrease the level of
that frequency band.
UP
DOWN
BASSBOOST
Bass Boost button
SELECT
DISC
ROCK
POP
CLASSICAL
Pressing the digital equalizer buttons twice will put you in
the FLAT mode not shown in the display.
OPEN/CLOSE
CLEAR
PROGRAM
ATS
Preset button
5
Bass Boost
Use the Bass Boost feature to enhance the quality of bass
frequencies; however, note that applying Bass Boost at
higher volumes can cause some sound distortion.
SRS ( )* SOUND retrieval system
Your system includes a feature called SRS which brings
3
BAND GRAPHIC EQUALIZER
dimensional realism to stereo sound.
100 kHz
1kHz
10kHz
SRS ( ) button
•
When the SRS is on, your system electronically increases the
audio separation of the speakers so you can perceive a more
spacious stereo sound effect, like Home Theatre.
SRS
(
)
CUSTOM
VOLUME
UP
DOWN
SRS allows you to hear multiple sound sources. Audio
frequencies are processed to establish directional cues which
gives the impression that sound is coming from all parts of
the room. Additional speakers are not required, but the
addition of a Sub-woofer optimizes the sound performance.
BASSBOOST
SELECT
DISC
ROCK
POP
CLASSICAL
OPEN/CLOSE
CLEAR
PROGRAM
ATS
Press the SRS button to choose the SRS feature (the SRS
indicator lights).
* SRS, the SRS symbol ( ) and Sound Retrieval System are registered trademarks of SRS Labs, Inc.
•
Crank it up!
You may find it desirable to readjust
the volume, bass boost and equalizer
controls to optimize the sound
qualities. Some audio will be more
affected than others.
6
Using the Tuner
Not only does the digital tuner help you tune in stations more
easily, it also lets you preset as many as 32 radio stations for
easy access. The 32 stations can be intermixed between AM
and FM bands.
Press the TUNER/BAND function button to choose the tuner
function (the last station the radio was set to comes on).
TUNER/BAND Function button
STEREO/MONO
button
MEMORY
button
Tuning In Radio Stations
POWER
CD
TAPE
TUNER
VIDEO
1
VIDEO
2
3
BAND GRAPHIC EQUALIZER
After you select the Tuner function, you can
STANDBY
100 kHz
1kHz
10kHz
REMOTE SENSOR
SRS
(
)
CUSTOM
INTRO REPEAT PROGRAM
DISC
1
ALL DISC
S
ROCK
POP
CLASSICAL CUSTOM
SHUFFL
VOLUME AUTO TRACK SKIP
BASS BOOST REMAIN TIME
STEREO
VOLUME
100 Hz
kHz
10 kHz
FM
•
•
Press the TUNER/BAND function button to change the radio
band to AM or FM.
1
AM
kHz
MHz
TUNING
UP
DOWN
PRESET/TUNE
BASSBOOST
PRESET mode — Press the PRESET/TUNE button, the
programmed preset number is displayed (1-32) and
PROGRAM lights in the display. Press the + up, – down
buttons to scroll through the preset stations (1-32).
STEREO
/MONO
SEEK
/SCAN
SELECT
DISC
PROGRAM
DISC
3
ROCK
POP
CLASSICAL
OPEN/CLOSE
REPEAT
INTRO
SHUFFLE
CLEAR
PROGRAM
ATS
Tuning
UP (+)
DOWN (-)
button
PRESET/TUNE
button
•
•
TUNE mode — Press the PRESET/TUNE button, the
programmed preset number is not displayed and PROGRAM
does not light. Press the + up, – down buttons to scroll
through the frequency band.
Press the STEREO/MONO button to listen to FM stations in
stereo (STEREO appears in the display). Note that the FM
radio station must be transmitting in stereo for you to
receive it in stereo.
Stereo indicator
STEREO
FM
•
•
SEEK mode — Press and release the SEEK/SCAN buttonand
SE appears in the display. The system will stop tuning at the
next FM station received.
MHz
SEEK indicator
SCAN mode — Press and hold the SEEK/SCAN button
momentarily and SC appears in the display. The system will
scan the band playing the FM stations received for three
seconds until the SEEK/SCAN button is pressed again.
Weak Reception?
If the reception of an FM station
transmitting in stereo is weak, the
STEREO indicator might fade in and
out. Changing from FM Stereo to FM
Mono could improve the reception.
Note that both SEEK and SCAN feature are only possible in FM
mode.
7
automatic preset feature
This is a great feature that makes storing your presets a snap,
it’s just like your auto station programming on your VCR or TV.
1. Press the TUNER/BAND button to place your unit in the tuner
mode.
2. Press and hold the TUNER/BAND for five seconds. The system
will scroll through the FM band and store all the stations the
system received. Note that this feature does not scan the AM
band.
storing radio Stations in Memory
Preset as many as 32 stations for easy access.
PROGRAM indicator
1. Press the PRESET/TUNE to access tune mode. The
programmed preset number is not displayed and PROGRAM
does not light.
PROGRAM
STEREO
MHz
FM
2. Press the + up, – down buttons to scroll through the
frequency band to the desired station.
AM
3. Press MEMORY.
Preset Number
FM Station
frequency
4. Press the + up, – down buttons to scroll through the presets
to desired preset number.
5. Press MEMORY again to store the station.
Memories...
If the unit is unplugged, your preset
stations will remain in memory
forever.
Recalling Preset Stations
To recall a preset station make sure you are in PRESET mode by
using the PRESET/TUNER button. Then press the (+) or (-) button
to scroll through the presets.
8
Using the CD Player
CD function
button
Combined with features such as Shuffle, Repeat, and
Programmed play, the five disc CD changer gives you lots
of options for playing CDs. You can play 3” and 5” compact discs.
Knowing Your Buttons
1
2
The following buttons are used for basic CD operation:
DECK
DECK
CD (function button) — Press the CD function button to
PHONES
choose the CD player.
POWER
CD
TAPE
TUNER
VIDEO
1
VIDEO
2
3
BAND GRAPHIC EQUALIZER
Disc Select — Press DISC SELECT button to choose the CD to
STANDBY
100 kHz
1kHz
10kHz
REMOTE SENSOR
be played.
SRS
(
)
CUSTOM
INTRO REPEAT PROGRAM
DISC
1
ALL DISC
S
ROCK
POP
CLASSICAL CUSTOM
SHUFFL
VOLUME AUTO TRACK SKIP
BASS BOOST REMAIN TIME
STEREO
VOLUME
100 Hz
kHz
10 kHz
FM
1
AM
kHz
MHz
TUNING
Disc 1 - 5 — Press DISC buttons (1-5) for direct access to each CD.
UP
DOWN
PRESET/TUNE
BASSBOOST
Track/Search
Backward and Forward
STEREO
/MONO
SEEK
/SCAN
SELECT
DISC
PROGRAM
DISC
3
ROCK
POP
CLASSICAL
•
Stop mode— Moves you to the beginning of the
OPEN/CLOSE
REPEAT
INTRO
SHUFFLE
CLEAR
PROGRAM
ATS
preceding or following track.
•
Play mode— Press and release
beginning of the following track.
to move to the
to search
to move to the beginning of
Press and hold
backwards.
to search forward or
TRACK/SEARCH
backward
TRACK/SEARCH
forward
Press and release
current track (if within one second of current track
system will go to preceding track).
OPEN/CLOSE
button
Stop — Stops play.
PLAY/PAUSE
STOP
DISC (1-5) buttons
DISC SELECT button
Play/Pause
— This button works as a toggle switch:
press to begin play and again to pause play.
Panel Display Messages
The following Panel Display messages tell you what the CD player is
doing:
Message
Meaning
CD function is active
CD drawer is in (closed).
CD drawer is out (open).
There are no discs in the CD drawer.
Too many discs in system, remove a disc from disc tray. Switch to TAPE source and then
back to CD.
No tracks are programmed (applies to both Program and Auto Track Skip modes).
No tracks are available in program play mode or Auto Track Skip mode.
Program is full (applies to both Program and Auto Track Skip modes).
Reading disc’s table of contents (how many tracks it has and the total time for the
disc). This information is displayed in Stop mode.
9
Loading Discs
Load & Play (At the Same Time)
1. Press the OPEN/CLOSE button to open the
CD compartment drawer.
It’s okay to open the CD drawer
while a disc is playing in order to
load discs into the front tray
locations.
2. Place the CD(s) into the drawer.
3. Press the DISC SELECT button to rotate the drawer
in order to load another CD.
4. Press the OPEN/CLOSE button to close the
CD compartment drawer.
Playing Discs
After you get the discs loaded, press the DISC SELECT or the
corresponding DISC (1-5) button to choose the CD you want
to play, and then:
•
•
Press Play/Pause to begin play.
Press Stop to stop disc play.
CD Playing Time
The elapsed time for a track appears in the display while the
track is playing (TIME appears above the running time).
ALL DISCS
DISC
TRACK
TIME
To see how much time is remaining on the disc, press the CD
function button (REMAIN TIME appears above the time
remaining on the disc).
Elapsed time of current track
Shuffling Play Order
Turning on the Shuffle feature causes the tracks to play in a
random order.
•
Press the SHUFFLE button to start random track play.
SHUFFLE appears in the display while the feature is
active.
Shuffle Mode indicator
•
Press the SHUFFLE button a second time to turn it off.
1
DISC
SHUFFLE
TRACK
DISC
TIME
Repeating Play Order
Use the REPEAT button to repeat one track, one disc, or all
five discs.
•
Press the REPEAT button once to repeat the current track
(REPEAT 1 appears in the display).
Repeat Mode indicator
•
Press REPEAT a second time to repeat all tracks (one disc
or all discs appear in the display). If you are in multi-disc
play and REPEAT ALL mode, all discs will play and then
repeat.
REPEAT
DISC
ALL DISCS
TRACK
TIME
•
Press REPEAT a third time to turn off the feature.
10
Choosing Discs for Play
When you load five discs at one time, you can choose which
disc you want to play by pressing the DISC SELECT or the
corresponding DISC (1-5) buttons.
Shuf fleShuf fleShuf fleShuf fleShuf f...
Turn on Repeat while you’re
shuffling play, and after all of the
shuffled tracks have been played,
they’ll play again...only not in the
same order.
After the current disc finishes playing, the system moves on
to the next disc. If you want to listen to only one of the five
loaded discs, use the corresponding DISC (1-5) buttons .
DISC Buttons (1-5)
Press one the DISC (1-5) buttons to listen only to the current
disc. You can use this feature while in Shuffle or Repeat
mode, but if you press one of the DISC (1-5) buttons during
programmed play, the program feature is turned off.
Programming Play Order
Playing all discs
You must be in Stop mode in order to program play order.
1. Press the PROGRAM button.
REPEAT
DISC
ALL DISCS
TRACK
TIME
•
•
PROGRAM blinks in the display.
– – appears in the display beneath the TRACK
indicator.
Playing current disc only
•
Pr 01 appears in the display indicating that this is first
programmed track.
REPEAT
DISC
1
DISC
TRACK
TIME
2. Press the DISC SELECT button or the corresponding DISC
(1-5) buttons to choose a disc.
3. Press TRACK/SEARCH forward or TRACK/SEARCH
backward to choose a track.
4. Press PROGRAM to save the track in the program
memory.
PROGRAM
DISC
TRACK
5. Repeat steps 2-4 above to program up to 32 tracks.
•
PF appears in the display when the program is full.
6. Press PLAY/PAUSE to begin programmed play.
Program number
(01 indicates first
programmed track)
Track number
(04 indicates that
track 4 on current disc
has been selected)
Repeating a Program
When you program tracks into memory, you can repeat the
program by pressing the REPEAT button after the program
begins playing.
11
Recalling and Editing the Program
You must be in Stop mode in order to recall and edit the
program.
PROGRAM
DISC
TRACK
1. Press the PROGRAM button to enter Program mode.
•
The display shows first programmed track
(04 in the example to the right).
Track 04 is the 1st programmed track.
2. Press PROGRAM to move to the next program number
until you get to the programmed track you want to
change (Pr 02 in the example to the right).
PROGRAM
DISC
TRACK
3. Press DISC SELECT or the corresponding DISC (1-5) buttons
to choose the disc, and then press TRACK/SEARCH forward
or TRACK/SEARCH backward to choose a replacement
track (09 in the example to the right).
Track 09 is the 2nd programmed track.
4. Press PROGRAM to change the current programmed track
to the one you just selected.
PROGRAM
DISC
TRACK
The 2nd programmed track is changed from Track
09 to Track 08.
Clearing the Program
Press the PROGRAM button followed by the CLEAR button
terminates CD play and all selected play modes are then
cancelled.
Instant Replay
To play the last program you set,
press PROGRAM to enter Program
mode, and then press PLAY/PAUSE.
Using Auto Track Skip (ATS)
Auto Track Skip (ATS) is the opposite of programmed play:
instead of programming the tracks you want to hear, you
indicate which tracks you don’t want to hear.
DISC
AUTO TRACK SKIP
You can choose as many as 16 tracks to be automatically
skipped. The process for creating and editing an ATS program
is nearly identical to that of programming disc play.
Track 08 is the first track selected in the ATS
program (Pr 01).
12
Creating an ATS Program
1. Press the ATS button (AUTO TRACK SKIP blinks in
the display).
2. Press the DISC SELECT button or the corresponding DISC
(1-5) buttons to choose a disc.
3. Press TRACK/SEARCH forward or TRACK/SEARCH
backward to choose the first track to
be skipped (the track number and Pr 01 appears in
the display).
4. Press PROGRAM to add the selected track to the ATS
program.
5. Repeat the preceding steps to add more tracks to the ATS
program.
6. Press PLAY/PAUSE to begin playing the ATS program.
Recalling and Editing the ATS Program
DISC
AUTO TRACK SKIP
Editing the ATS program is a lot like editing a regular
program.
1. Press the ATS button to go to Auto Track Skip mode.
The first ATS program number (Pr 01) contains
track 08.
2. Press PROGRAM to move to the next program number
until you get to the programmed track you want to
change.
DISC
AUTO TRACK SKIP
3. Press DISC SELECT or the corresponding DISC (1-5)
buttons to choose the disc, and then press
TRACK/SEARCH forward or TRACK/SEARCH backward to
choose a replacement track.
Track 6 is selected to replace track 8 as the first
programmed track to be skipped.
4. Press the PROGRAM button to change the current
skipped track to the one you just selected.
Clearing the ATS Program
Press the ATS button followed by the CLEAR button
terminates CD play and all selected play modes are then
cancelled.
13
Using the Cassette Deck
Understanding the Buttons
If you know what each button does, it’s easy to figure out
how to operate the tape decks.
RECORD
— Press to record from the radio, CDs, VIDEO 1, or
VIDEO 2. You can only record on Deck 1.
1
2
DECK
DECK
PLAY
— Press to play cassettes.
PHONES
REWIND
— From stop mode, press to rewind the tape
toward the beginning.
FAST FORWARD
— From stop mode, press to advance
the tape toward the end.
STOP/EJECT
— Press to stop current tape activity, or to
open the cassette compartment door when no buttons are
active.
PAUSE — Press to interrupt tape play or record. Press a
second time to resume tape play or tape record mode.
Playing Cassette Tapes
You can play cassettes from either of the two tape decks.
1. Press TAPE function button to activate the cassette deck.
2. Press STOP/EJECT to open the cassette compartment door.
Erase Protection
When you record new material, the
cassette deck records over whatever
is on a tape. To protect a tape from
accidental erasure, break off one or
both plastic tabs (one for each tape
side) on the top of the cassette tape.
If you decide later to record on the
tape, seal the hole with a piece of
cellophane tape.
3. Insert a tape into the compartment door, and then close
the door securely.
4. Press REWIND or FAST FORWARD to move tape
to the desired starting point.
5. Press PLAY to begin playing the tape.
Automatic Stop Feature
When the tape deck is operating in any mode and the end of
the tape is reached, the system automatically shuts itself off
and returns all buttons to the off (up) position.
A
A
6 0
A
A
Recording from the Radio
1. Insert a cassette tape into Deck 1.
2. Choose the TUNER/BAND function and select a radio
station.
3. Press RECORD to begin recording.
4. Press STOP/EJECT to end recording.
14
Recording from CD Player
1. Insert a cassette tape into Deck 1.
2. Choose the CD function.
We’re on the Level
3. Insert the disc(s) to be recorded. You can start with any
track on a disc or you can create a program to record.
The built-in Automatic Level Control
automatically sets the input level for
optimum recording sound. You can
listen to, and even adjust the volume
setting of the radio without affecting
the quality of the recording—just
don’t change the station.
4. Press the RECORD button on the cassette deck to begin
recording.
5. Press PLAY/PAUSE on the CD player to begin recording.
Recording Cassettes
1. Insert the pre-recorded tape you want to record into
Deck 2.
2. Insert a blank tape to into Deck 1.
3. Press the PAUSE button and then the RECORD button on
Deck 1.
4. Press the PLAY button on Deck 2. (Playback and
recording begin simultaneously.)
Recording from video 1 or video 2
1. Insert a blank cassette tape into the tape deck.
2. Make sure that the auxiliary device is connected
correctly, then choose the VIDEO 1 or the VIDEO 2
function.
3. Press the RECORD button on the cassette deck to begin
recording, and then start playback on the auxiliary
device.
15
Using the Remote Control
Battery Installation
1. Open the battery compartment door.
2. Insert 2 AAA-size batteries as indicated on the back of
the remote control.
3. Close the battery compartment door.
General Controls
The following buttons control the power and the volume:
POWER — Press to turn on and turn off power to the system.
POWER
TUNER
VIDEO
TAPE
VOL (> for up and < for down) — Use to control the volume
for all functions.
CD
MUTE — Press once to mute sound, Stand by LED blinks;
press again to turn off mute.
RE
S
P
E
Q
E
T
EQ PRESET — Press to scroll through the PRESET EQ
functions.
V
O
L
L
V
Function Controls
Press one of the FUNCTION control buttons to choose that
function: TUNER, CD, TAPE, or VIDEO 1/VIDEO 2.
M
UT
E
TRACK
PLAY
TRACK
Note that the TUNER button also controls the radio band
(AM or FM).
SEARCH
SEARCH
STOP
Tuner Controls
SHUFFLE
SEEK
REPEAT
PRESET
DISC SKIP
Use the TUNER buttons to control radio functions as you
would from the front of the system.
CD Controls
TUNING
The remaining buttons control the CD player.
DISC SKIP — Use this button to change discs.
PLAY/PAUSE — Use to play discs, and to pause disc play.
STOP — Use to stop disc play.
TRACK/SEARCH
and
— Use to move to the
beginning of a track or search within a track.
REPEAT — Use to repeat one track, one disc, or all five discs.
SHUFFLE —Use to cause the tracks to play in a random order.
In Your Sights
The remote control works by line-of-
sight, which means that for best
results, you should aim the remote
directly at the front of the unit.
16
Care and Maintenance
Cleaning the Exterior
•
Disconnect the system from AC power before cleaning the
exterior of the system with a soft dust cloth.
Handling Compact Discs
•
•
•
Do not touch their signal surfaces. Hold by the edges, or by
one edge and the hole.
Do not affix labels or adhesive tape to the label surfaces.
Also, do not scratch or damage the label.
Discs rotate at high speeds inside the player. Do not use
damaged (cracked or warped) discs.
Cleaning Compact Discs
•
•
•
Dirty discs can cause poor sound quality. Always keep discs
clean by wiping them gently with a soft cloth from the
inner edge toward the outer perimeter.
If a disc becomes very dirty, wet a soft cloth in water, wring
it out well, wipe the dirt away gently, and then remove
any water drops with a dry cloth.
Do not use record cleaning sprays or anti-static agents on
discs. Also, never clean the discs with benzene, thinner, or
other volatile solvents which may cause damage to the disc
surface.
A
Tape Care
Quit Slacking
A little bit of slack in
your tapes can
•
Don’t expose tapes to sunlight or store in hot places. High
temperatures may warp the shell or damage the tape itself.
cause scratches on the tape,
or worse yet, the tape could break.
If you notice some slack in the tape,
use a pencil to tighten it up before
you insert it.
•
•
Keep cassettes in their boxes when not in use.
Cassette tapes can be erased by magnetic fields produced by
magnets, electric motors, electrical transformers, and other
devices. Keep tapes away from magnets and magnetic fields.
Cleaning the Tape Heads
Iron oxide particles from the magnetic tape can build up on the parts that come in
contact with the tape. These deposits can cause incomplete erasure, muffled
playback sound, and might prevent automatic stop.
Open the compartment door, push the PLAY button and gently
clean the heads, capstan, and pinch wheel with a head cleaner.
Always unplug the power cord before cleaning, and allow 30
minutes drying time when using a liquid cleaner.
Clean these parts
Clean heads after every 25 hours of use.
•
Demagnetize the head occasionally with a head demagnetizing cassette
(available from many audio equipment stores).
•
Never use any metal objects on or near the tape heads.
Do not allow any cleaning material to fall into the tape assembly.
17
Troubleshooting Tips
Problem
Solution
System doesn’t turn on
• Make sure power cord is securely plugged into the AC power outlet.
• Unplug the unit for a moment, and then plug it back in.
• Check the outlet by plugging in another device.
No sound
• Adjust volume setting.
• Check for proper connection of speaker wires.
• Make sure you’ve selected the correct function: TUNER, CD, TAPE, or
VIDEO 1/VIDEO 2.
• Make sure volume is not muted. To deactivate, press MUTE on the
remote.
Poor radio reception
CD doesn’t play
• Make sure FM antenna is connected and properly oriented.
• Rotate external AM loop antenna to achieve better AM reception.
• Try turning off electrical appliances near the unit, such as hair dryers,
vacuum cleaners, and fluorescent lights.
• Make sure the tray contains a disc.
• Make sure that discs’ labels are facing up.
• Make sure that Pause mode is not activated.
• Make sure CD function is selected.
CD sound skips
• Clean the disc (as explained in “Care and Maintenance”).
• Check disc for warping, scratches, or other damage.
• Check for vibration or shock that may affect the CD player. Move system if
necessary.
CD buttons won’t respond
• Unit is locked up; switch the function from CD to Tuner or Tape, and then
switch back to CD.
CD player won’t change discs
when DISC SKIP is pressed.
• Unit is locked up; switch the function from CD to Tuner or Tape, and then
switch back to CD.
Distorted or noisy recordings
• Inspect the recording head and clean it if necessary.
• Demagnetize recording head (as explained in “Care and Maintenance”).
Remote control doesn’t work
• Make sure the audio system is plugged into a working AC outlet.
• Make sure that the batteries are correctly installed in the remote control.
• Make sure batteries in the remote are okay. Replace weak batteries.
• Point the remote directly at the front of the unit while pressing the
buttons.
• Move closer to the unit with the remote control.
• Make sure that there are no obstacles between the remote and the unit.
18
Index
SKIP button 16
STOP button 16
TAPE button 16
TRACK/SEARCH buttons 16
TUNER button 16
L
A
Loading CDs 10
Antenna, AM radio 3
Antenna, FM radio 3
connecting 3
ATS (Auto Track Skip) 12
ATS Program
loading and playing at the same time
10
Location
speaker 2
unit 2
TUNING UP and DOWN buttons 16
VOL UP and DOWN buttons 16
creating 13
recalling and editing 13
REPEAT button 10
Repeat Mode Indicator 10
Repeating Play Order 10
M
AUX input jacks 3
Auxiliary Components 3
Mode Indicators 4
Moisture Condensation 2
S
B
O
SHUFFLE button 10
Shuffling Play Order 10
Speaker Placement 2
Bass Boost Indicator 4
OPEN/CLOSE button 10
C
P
Speakers
Cassette player features
automatic level control 15
CD Buttons 9
CD Playing Time 10
REMAIN TIME 10
CD Time Indicator 4
Panel Display 4
connecting 3
installation 3
placement 2
Panel Display indicators
CD Playing Time 4
EQ display 4
Standby indicator light 3
Storing Radio Stations in Memory 8
Number indicator 4
Radio Band 4
Panel Display Messages 9
PROGRAM 12
Programming Play Order 11
Choosing Discs for Play 11
Cleaning the Tape Heads 17
Clearing the Program 12
Compact discs
3" and 5" 9
T
Tape Care 17
TAPE function button 14
Troubleshooting Guide 18
TUNER function button 7
Tuning In Radio Stations 7
changing radio bands 7
tuning in stations 7
R
Radio Band Indicator 4
Recalling and Editing the Program
12
Recording on Cassette Tapes
from a CD 15
from VIDEO 1 or VIDEO 2 15
from the radio 14
recording 15
Compact discs, cleaning 17
Compact discs, handling 17
D
V
DISC SELECT button 9
Volume dial 5
E
Remote Control 16
VIDEO button 16
battery installation 16
CD button 16
EQ PRESET button 16
MUTE button 16
EQ Electronic Equalizer 5
EQ Settings
Flat, Rock, Classical, Custom 5
Erase Protection 14
PLAY/PAUSE button 16
POWER button 16
PRESET button 16
REPEAT button 16
SEEK/SCAN buttons 16
SHUFFLE button 16
F
Function Buttons
TAPE, TUNER, CD, VIDEO 5
H
Headphones 3
safety 3
19
Limited Warranty
What your warranty covers:
• Any defect in materials or workmanship.
For how long after your purchase:
• Two years.
(The warranty period for rental units begins with the first rental or 45 days from date of shipment to the
rental firm, whichever comes first.)
What we will do:
•
•
Provide you with a new, or at our option, a refurbished unit.
The exchange unit is under warranty for the remainder of the original product’s warranty period.
How to make a warranty claim:
• Properly pack your unit. Include any cables, etc., which were originally provided with the product. We
recommend using the original carton and packing materials.
• Include in the package evidence of purchase date such as the bill of sale. Also print your name and
address and a description of the defect. Send standard UPS or its equivalent to:
Thomson Consumer Electronics, Inc.
Product Exchange Center
32 Spur Drive
El Paso, Texas 79906
• Pay any charges billed to you by the Exchange Center for service not covered by the warranty.
• A new or refurbished unit will be shipped to you prepaid freight.
What your warranty does not cover:
• Customer instruction. (Your Owner’s Manual provides information regarding operating instructions and
user controls. For additional information, ask your dealer.)
• Installation and set-up service adjustments.
• Batteries.
• Damage from misuse or neglect.
• Products which have been modified or incorporated into other products.
• Products purchased or serviced outside the USA.
• Acts of God, such as but not limited to lightning damage.
Product Registration:
• Please complete and mail the Product Registration Card packed with your unit. It will make it easier to
contact you should it ever be necessary. The return of the card is not required for warranty coverage.
How state law relates to this warranty:
• This warranty gives you specific legal rights, and you may have other rights which vary from state to
state.
If you purchased your product outside the USA:
• This warranty does not apply. Contact your dealer for warranty information.
P.O. Box 1976, Indianapolis, IN 46206
© 1996 Thomson Consumer Electronics, Inc.
Trademark(s) ® Registered
Model RP-9540/RP-9555
343A6869-0001 ( Rev. 0 E/S)
96-10
Marca(s) Registras
Printed in China
|