11
1
2 3 4 5 6 7 8 9
12
10
13
PWMA-1003T
PWMA-2003T
PWMA-3003T
Technical
Main Channel Power Output
PMPO,8 Ohms, 1KHz test
THD(1KHz)
1000WX2
<1%
2000WX2
<1%
3000WX2
<1%
21 20
19
18
17
16 15 14
Normal Load Impedance
8 Ohm
8 Ohm
8 Ohm
(11) SUB.OUT VOLUME CONTROL
(1) POWER SWITCH
Input Sensitivity Impedance
Press to switch the power unit ON or OFF.
(12) LED DIMMER
400mV/33k Ohm 400mV/33k Ohm
400mV/33k Ohm
6mV/600 Ohm
CD/DVD AUX
Microphone
Adjust the blue lights and blue rings.
(2) TUNING-
Radio tuning button.Decrements the radio
frequency.
6mV/600 Ohm
6mV/600 Ohm
(13) MASTER VOLUME CONTROL
Adjusts the volume level. Turn the knob.
Clockwise to increase the volume.
Signal to Noise Ratio
Pure Amplifier
(3) PREV <
76dB
71dB
76dB
71dB
76dB
71dB
(14) ECHO CONTROL
When it is TUNER,it means the preview
station;When it is USB, it means the
preview song.
KARAOKE
Turn the knob to adjust the MIC echo level.
Frequency Range
(15) MIC TREBLE
Adjusts the treble of MIC.
(4) TUNING+
Frequency Response(40Hz-15KHz)
+2dB
+2dB
-
+2dB
-
-
Radio tuning button. Increments the radio
frequency.
(16) MIC BASS
Tone Characteristic(100Hz-10KHz)
Power Requirements
+14dB
+14dB
+14dB
-
-
-
Adjusts the bass of MIC.
(5) NEXT >
AC~110V/60Hz AC~220V50Hz
483(W)X300(D)X80(H)mm
7.8kg
(17) MIC VOLUME
When it is TUNER,it means the next station;
When it is USB,it means the next song.
Adjusts the volume level. Turn the knob
clockwise to increase the MIC volume.
Dimension
Weight
(6) AM/FM、 PLAY/PAUSE
(18) USB INPUT JACKS
6.8kg
8.3kg
Press it to select AM/FM when it is tuning，
and to play or pause when you use USB
input.
Please notes that this USB only can read
MP3 form files,not supportable for PWA
files. In case of any damage to this unit,
When you take USB out,please select the
button“PAUSE”or other input source.
(7) A/B SPEAKERS OUTPUT SELECTOR
Three mode：A、B、A+B
(8) MENU CONTROL
(19) MIC INPUT JACKS 1&2
This is used to increment and decrement
level for the selected function of Master
Volume , Bass , Treble, Balance，Auto
station seer.
KARAOKE MIC connect to these jacks.
(20) HEADPHONE JACKS
Headphone connect to these jacks.
(21) IPOD/MP3 JACKS
(9) INPUT
This is used to select the input sources
IPOD/MP3 connect to these jacks.
DVD/CD、TUNER、USB、IPOD/MP3、AUX
(10) FUNCTION DISPLAYED FLUORESCENT
WINDOW
4
3
PDF created with pdfFactory trial version www.pdffactory.com
1、AUTO
Automatically search the single source when power on.
2
3
、
CD/DVD
CD/DVD Selector.
AUX/USB
、
Other single source or USB Selector.
WA RNIN G
4、
TUNER
TUNER Selector.
5、
LOUD
Press the button to correct an unbalance program source.
、IPOD/MP3
6
IPOD/MP3 Selector
、
7、AUTO SCAN
AM/FM auto scan selector
，
scan and store stations
1
2
4
8
9
10
11
3
5
6
7
automically. Can store 50 stations.
MEMORY
8
、
After a station has been found
，
you can store the station
by pressing the MEMORY button,and the screen will
display SAVE.
9、
ST/MONO
Stereo and mono selector.
10、
FM/PAUSE
Muti-functional key，it is FM selector when it isTUNER，
(1)TUNER ANT
(6) WIRELESS MICROPHONE ANTENNA
and it means PAUSE when you use USB.
AM/PLAY
Connect for AM and FM antennas.
11
、
(7) A SPEAKER OUTPUT TERMINALS
Connect your speaker system to
these terminals.
Muti-functional key
and it means PLAY when you use USB.
12/13 PREV> NEXT<
，it is AM selector when it is TUNER,
(2) AUDIO INPUT JACKS
Connect the audio ouput jacks of
、
DVD/CD、AUX to these jacks.
Station preview and next selector.when you play USB,it
means preview song or next song.
14/15、TUNING> TUNING<
(8) B SPEAKER OUTPUT TERMINALS
Connect your the other speaker system(s) to
these terminals.
(3) REC.LINE OUTPUT JACKS
Connect the RECORD input jacks to
these jacks.
The two keys are used to adjust to the best single of
(9) COOLING FAN
the stations.
、TREBLE
Master Treble Up And Down
16
17
(4) PRE OUTPUT JACKS
(10) 110V/220V SWITCH
According to power voltage ,push this button
to the station of the110V or 220V.
Connect the professional input jacks
、
BASS
to these jacks.
Master Bass Up And Down
18/21、L/R
(5) SUB-WOOFER OUTPUT JACKS 1&2
(11) POWER CORD
Connect to AC 110V/60Hz&220V/50Hz outlet.
Left / Right Balance Control
、SPEAKER
19
Speaker
（
A/B/A+B
）
Selector
20/23 VOL+ VOL-
、
Master Volume Up And Down
、MUTE
22
Mute Selector
RemoteController Operation
1. Remote controller should be operated within 6
meter and the scope of 30 in front of receiver.
2. Make sure that there is no big obstacle between
remote controller and machine.
3. Remote sensor should be far away
fromthe light,high amounts of light can affect its performance.
5
6
PDF created with pdfFactory trial version www.pdffactory.com
2 WIRELESS
MICS
WIRELESS
ANTENNA
AM ANTENNA
IPOD or
MP3 input
2 MIC
INPUTS
FM ANTENNA
1. Make sure that all connections are properly connected and the main
volume is set to minimum level before turning on the unit.
2. When more then one pair of speakers are used, (specially the main
speaker output) make sure that the speakers used are of the same
wattage and impedance, otherwise the unit maybe damaged under
high power or long term operation.
WA RNIN G
3. To avoid humming sounds and unwanted noise, make sure that all the
wires are properly inserted.
AUX
Power Amp
2 Mono Sub Outputs
CD/DVD
4. For speaker cords, strip off the vinyl coating and twist the wire tip.
Push down the pink jack or loosen the screw terminal, before inserting
the wire tip, then fasten it and tighten the screw. Be careful not to let
the wires stick out of the terminal otherwise this may cause a short
circuit when wires of different terminal contact each other.
5. After the unit is turned on, adjust the main volume to the desired level
same is true with the bass and treble volume, etc.
Main Speakers
Power Amp
CD Recorder
Preamp Out
Power Amp
7
8
PDF created with pdfFactory trial version www.pdffactory.com
|